-
About Us
-
-
-
Hanging-type Intelligent Cabinets
Share：
■ The cabinet is made from cold-rolled steel with a thickness of 1.2 mm. It has an IP55 protection level.
■ All functional units inside the cabinet are designed with a modular plug-in card design. Various service cards can be mixed and matched, and the platform can automatically recognize the slot position.
■ The cabinet is equipped with two sets of temperature-controlled fans and has built-in fusion splice trays. It supports 2 Gigabit optical ports and 8 Gigabit RJ45 ports.
■ Various power outputs can be optionally installed, supporting the access of third-party frontend devices.
■ The management software displays real-time monitoring of device temperature, humidity, input and output voltage, surge protection status, network connectivity, cabinet door status, and fan operation.；
■ The system can be expanded to a maximum of 10 controllable power output interfaces, with a total direct current output power of no less than 400W. Each 220V controllable power output has an independent socket-type fuse unit. After removing the card, the fuse can be manually replaced. The center distance between the two poles of the output terminal is no less than 9.5mm.
■ Supports current detection.
■ Supports real-time monitoring to determine if the device has lost network connection or power.
■ When the internal device temperature is too high, there are anomalies in input/output voltage, network disconnects, optical fiber breaks, fan activation, or the cabinet door is opened, alerts can be sent via the management software through voice calls, audible and visual signals, or pop-up notifications.
■ The system has a log recording feature. These logs can be searched by time or event type.
■ Supports network port activation and deactivation, rate configuration, 802.3x flow control, name modification, frame statistics, mirroring, etc.
■ Supports the ITU G.8032 standard ERPS ring network protocol with a self-healing time of less than 20ms.
■ Supports SNMP, Web, and Console management functionalities.
Category:
- Product Description
- Technical Parameters
- Dimension drawing
-
- Commodity name: Hanging-type Intelligent Cabinets
- Commodity ID: ZA-IPCIS100-K2-1-328
■ The cabinet is made from cold-rolled steel with a thickness of 1.2 mm. It has an IP55 protection level.
■ All functional units inside the cabinet are designed with a modular plug-in card design. Various service cards can be mixed and matched, and the platform can automatically recognize the slot position.
■ The cabinet is equipped with two sets of temperature-controlled fans and has built-in fusion splice trays. It supports 2 Gigabit optical ports and 8 Gigabit RJ45 ports.
■ Various power outputs can be optionally installed, supporting the access of third-party frontend devices.
■ The management software displays real-time monitoring of device temperature, humidity, input and output voltage, surge protection status, network connectivity, cabinet door status, and fan operation.；
■ The system can be expanded to a maximum of 10 controllable power output interfaces, with a total direct current output power of no less than 400W. Each 220V controllable power output has an independent socket-type fuse unit. After removing the card, the fuse can be manually replaced. The center distance between the two poles of the output terminal is no less than 9.5mm.
■ Supports current detection.
■ Supports real-time monitoring to determine if the device has lost network connection or power.
■ When the internal device temperature is too high, there are anomalies in input/output voltage, network disconnects, optical fiber breaks, fan activation, or the cabinet door is opened, alerts can be sent via the management software through voice calls, audible and visual signals, or pop-up notifications.
■ The system has a log recording feature. These logs can be searched by time or event type.
■ Supports network port activation and deactivation, rate configuration, 802.3x flow control, name modification, frame statistics, mirroring, etc.
■ Supports the ITU G.8032 standard ERPS ring network protocol with a self-healing time of less than 20ms.
■ Supports SNMP, Web, and Console management functionalities.
-
Single-phase Automatic Recloser
Rated Voltage
AC 220V/50HZ
Rated Current
16A (optional 63A)
Rated Power
50Hz
Surge Protection
Capability
10KA
Operating Time
≤0.05s
Strong Electric Surge Protection
Maximum Throughput40KA (optional 60KA, 80KA,100KA,120KA)
Nominal Operating Voltage
220VAC
Maximum Continuous Operating Voltage
385VAC
Response Time
<25ns
Network Features
Optical Port
Two SFP optical interface
Optical Port Rate
1000Mbps
Network Port
Eight 10/100/1000Base-Tx; RJ45 ports
Network Rate
10/100/1000Mbps adaptive
Protocol Standard
IEEE802.3 10Base-T,IEEE802.3u 100Base-TX, IEEE802.3x Flow Control,IEEE802.3u 100Base-FX, IEEE 802.1Q VLAN, QINQ, ERPS
Duplex Mode
Full Duplex/Half Duplex
Network Port
IEC61000-4-5：1.2/50μs 3KV(2Ω),ITU-TK21：10/700μs 6KV(40Ω)
MAC Address Table
10K
Packet Buffer
2Mbit
Controllable Power Output
Centralized power supply Unit
Standard DC12V50W (AC24V150/200/300W&DC12V/36V/54V 400W can be added)
Controllable DC Power Output
Standard eight sets of DC/AC
(expandable to 20 sets, with an optional current detection feature for individual groups)
DC Power Port Surge Protection
1.2/50μs 6KV(2Ω)
Interfaces
Surge Protection Monitoring Interface
Available, capable of monitoring the condition of smart lightning protectors and counting lightning strikes.
Cabinet Opening Snapshot Interface
Available, can connect to a serial camera to implement a snapshot feature upon cabinet opening.
Digital I/O
Equipped with multiple digital input and output ports.
Analog I/O
Equipped with analog input and output interfaces.
RS485
Equipped with multiple RS485/232 interfaces.
Other Parameters
Cabinet Dimensions
380*260*560mm
Power Input
AC100V-AC240V
Operating Temperature
-40℃-75℃
Lighting
0.25WLED
Keyword：
Hanging-type Intelligent Cabinets
Next
Next
Releate Product
Inquiry
We will contact you within one working day. Please pay attention to your email.
Copyright © 2022 ZHOAN